True Manufacturing STG2HRI-2S Spec Series 68" 2 Door Roll-In Heated Holding Cabinet (Scratch & Dent)

True Manufacturing STG2HRI-2S Spec Series 68" 2 Door Roll-In Heated Holding Cabinet (Scratch & Dent)

Always serve your merchandise at optimal temperatures with this True Manufacturing STG2HRI-2S Roll-In Heated Holding Cabinet. Produce large amounts of warm air with a finned tube heating system that utilizes multiple fans to push warm air evenly throughout the heated cabinet interior. Hold merchandise inside the cabinet interior at temperatures of 140°F to 180°F, which will keep your food warm during down times. Keep merchandise tender with a humid environment created inside this True Manufacturing Heated Holding Cabinet, which can be manually controlled with a vent that allows you to release a specific amount of humid air. A roll-in ramp allows you to push racks into the interior of this true manufacturing cabinet, while the easy to use controls make operating this heated holding cabinet hassle-free. A durable stainless steel exterior provides a long-lasting Commercial Heated Holding Cabinet that will stand up in the busiest of kitchens, while the self-closing doors and magnetic gaskets quickly shut the door after use, which seals the warm air inside. Quickly find products within the illuminated interior, while the 120° stay open feature allows you to have this door stay open without any added force, which frees up your hands to grab merchandise. Never disappoint your customers by serving cold food when using this heating cabinet!

This True Manufacturing STG2HRI-2S Roll-In Heated Holding Cabinet has minor scratches and dents. An area to pay attention too would be the scratching and denting across the front, right and left side of this unit, while also paying attention to the minor denting on the back of this unit. See the pictures above for further reference. The unit has been tested and still functions properly. Please call 1-800-828-8564 for special scratch and dent product conditions, pictures and pricing.

• Stainless steel door with aluminum sides
• Interior aluminum sides and back with a stainless steel floor and ceiling
• Holding temperatures of 140°F to 180°F
• Finned tube heating elements
• Low-velocity fans push air evenly throughout the cabinet
• Manually controlled vent located on top of the cabinet
• Accepts roll-in racks of 66"(h) x 27"(l) x 29"(d) NOT INCLUDED
• Positive seal self-closing doors
• 120° stay open feature
• Magnetic door gaskets
• Incandescent interior lighting
• Easy to use electronic controls with power, lights and fan switches
• Unit must be hardwired
• Made in USA
• NSF, ANSI, UL and cULus listed
• Roll-in ramp

• Make: True Manufacturing
• Model: STG2HRI-2S
• Serial: 9901768
• Volts: 208/230
• Watts: 4000
• Phase: 1
• Amps: 20
• NEMA: Unit must be hardwired
• Dimensions: 83-3/4”(h) x 68”(w) x 34-1/2”(d)
• Weight: 630 Lbs.

• 3 Years Parts and Labor